RHI

The GT Coupe is a must see!

GT COUPE

LAUNCH OF GT COUPE SERIES

 

May 2018, brought the completion of LIFE PROOF BOATS first ever GT COUPE.  A sleek stylish 31’ vessel designed to compete heavy in the pleasure craft market. With a 3/4 cabin style (optional canvas bulkhead) the cabin space of the boat is open and inviting. The interior space is smart in its ability to be reconfigured for entertaining under the shade of the roof or open to the outdoors on the rear deck of the boat. Its fundamental features allow this boat to fit a wide range of boating lifestyle choices.

There are 3 optional configurations of the space behind the driver seat which allow the design of the boat to fit a galley, a 3rd suspension seat, or 2 additional bench seats. With the 2 additional bench seats there is room for 8 in the main cabin, and an additional 4 outside on the rear bench seat.

The cuddy interior offers opposing bench’s giving 6’7” of lay down length and with the center drop in filler panels the cuddy space is transformed into a single large berthing space. When nature calls there is also a full electric macerating toilet located on the port side of the cuddy.

Other key features that make this boat stand out, is the optional drop bow door, in deck fish boxes, optional FLIR camera, and designed to incorporate the very best in suspension seating. And for the fisherman out there, two Burnewiin universal accessory mounts are included in the base boat. They work great for grilling out as well since they double as a BBQ mount.

The GT Coupe Model starts at $300,000 and with options like paint, synthetic teak decking, and joystick piloting pricing can reach over $400,000.

 

Vessel Details:

Model Name ------------------- GT COUPE

Length --------------------------- 31’

Beam ---------------------------- 10’

Weight -------------------------- 10,500 lbs

Speed --------------------------- 55+ MPH with twin 350HP Outboards

HP Rating ---------------------- 1,250 HP (twin or triple configuration available)

Fuel Tank ---------------------- 200 Gallons

Water Tank ------------------- 40 Gallons

Black Water ------------------ 40 Gallons

Diesel for Heat -------------- 3 Gallons

 

 

Design Features of Note:

Self-Bailing Decks (even while static)

Optional Diesel Heat

Optional AC (with reduced holding tanks)

Galley Arrangement (sink, fridge, Microwave)

Windlass

Drop Bow Door

Electric Toilet

Large Holding Tanks

Gyro Stabilized Trim Assist System

 

CONTACTS FOR MORE INFORMATION

 

Micah Bowers – Sales

(360) 674 -7019 ext. 200

Micah@InventechMarine.com

 

Jenson Charnell – Sales

(360) 674 -7019 ext. 201

Jenson@InventechMarine.com

31FT GT Coupe to join new models for 2018

Targa GT Side .jpg

Already announcing a handful of new models for 2018, Life Proof Boats is pleased to announce another model has finished the design phase is green lighted to start production first quarter of 2018. This project code named the "GT Coupe" is targeting a market of clients who love the feeling of a open cabin boat (no rear bulkhead) but have the option of snapping in a canvas enclosure to create a closed cabin compartment for those raining or cold days on the water. Lounging and entertaining guests is also a major focal point for this design driving a flush cabin deck and lots of seating options. This first production model will feature three suspension seats but available options for cabin layouts will offer an additional bench seat in lieu of the rear suspension seat. 

Interacting with the water is our class leading 22 degree, fine entry 31FT hull. Outfitted with twin 350HP outboards this boat will see speeds on the boarder line of 60mph. With Suzuki's new dual prop 350HP outboards and gear ratio you should easily be able to push this boat beyond the 60mph mark. 

Available with our signature drop bow door, and fold out ladder. This is sure a boat that will favor well with any boater looking to do some exploring. 

The list of amenities available is more than the fair share for the average boater. A flushing head, is standard on all models and the cuddy cabin berth is large enough to easily accommodate two adults overnight in comfort. 

 

 


Come find us at the 2018 Seattle Boat Show to find out more details. 

21FT Hard Top Delivered

21FT Hard Top

Life Proof Boats is proud to announce the completion and delivery of a new 21FT Hard Top boat to our growing fleet of models. 

The design concept for this boat came from the love for a hardtop that is simple and can be offered at more of a price point to the market. We also love having a glass windscreen for the fact that you can then have a wiper blade. The glass was direct glazed and looks fantastic. There are lots of options for seating in the boat depending on the activity and guest count. With seating for 6 in the front or 6 in the boat, this boat offered lots of versatility. The driver and navigator seats sit behind a 50" wide console and are mounted on 4" suspension pedestal style seat posts offered by Taco Marine. They also have 6" of slide fore and aft with a 180 degree swivel option. 

For those cooler winter months you can option a full canvas enclosure that will keep you out of the weather, and if desired we can also install a diesel heater in the console. 

The rear bench converts to a sun pad within seconds to add another dimension to the boat for those wanting to lounge in the sun. 

Rear seat in the up position.

Rear seat in the up position.

Rear seat converted to sun pad. 

Rear seat converted to sun pad. 

Options and Performance

With a large section of power options you can use this platform in almost any situation. this first model was outfitted with a single 150HP Honda outboard, but could handle up to a 300HP Outboard. Speeds with the 150HP power plant topped out at 38 mph no matter if the boat had 4 adults on board and a full tank or just 1 person. Cruise speed is comfortable around 26-28 mph and at these speeds you will only be burning 6-6.5 gallons/hr. 

The deadrise of the hull is our desired 22 degree deep vee so it cuts through the water with ease. This hull also includes our delta shoe and performance fins, so it can turn on a dime. 

Overall weight of the boat came in around 4300 lbs as configured. The majority of the weight is decks down, keeping the vertical center of gravity very low, adding stability and ride quality. The hull plate on this boat will be offered as either .25" or .190" depending on the HP and water line length. 

Decks are welded down and two 4" rear and two  3" FWD deck scupper help to evacuate any water that finds its way inside the boat. 

Wrap Up

For those looking for a built tough little T-TOP that was very well thought out for life on the water this boat delivers. It shares all the great features we love with our bigger boats and puts them into an affordable, highly versatile platform that can sit almost any lifestyle. 

With a single 150HP Outboard Prices start at $89,000.00


For more information 

Email: Info@InventechMarine.com
Phone: (360) 674-7019

Diesel Center Console Launched

We are proud to announce the launching of our new diesel inboard center console line. With the heart of the platform in the form of a 6.6L Duramax Diesel putting out 500HP, and delivering the power through a Hamilton waterjet. At just under 6,300 lbs wet, the incredible power to weight ratio allows the boat to achieve sprint speeds in excess of 50 MPH. 

This is one of the first of many following high profile aluminum RIB's that will change the way the marine industry looks at RIB's. That is because it incorporates our new hybrid collar technology. With 20% air and 80% foam in the collar, your senses will tell you this is a typical inflatable. But the zipper running the whole length of the collar is a giveaway there is more to this boat. The zipper system gives the user ultimate control over servicing the collar. It is a game changer for the amount of control it gives the user in the event the separate, internal bladder is compromised. Because the other collar materials only protect the internal bladder from abrasion and UV rays, the lifespan of the collar itself is increased far beyond a conventional RIB. 

Also incorporated into the platform are the latest military grade suspension seats from Shockwave. The S3 mid back drop down seats incorporate 8" of suspension via Fox Float H2O shocks. And with the optional seat height adjustment package and drop down bolster seat, they allow the user to have the ultimate comfort in either a seated or standing position. 

While the displacement might be identical to your on road GMC pickup this engine has been massaged to give more power and handle the harsh marine environment. Coupled to a ZF transmission with optional push-button transmission selection and a drive line from Portland Drives lines, this power plant is incredibly quite and responsive. With one of the most remarkable aspects of the engine being its fuel economy, cruise on the platform seams to be around 32 mph while burning approx. 13 gallons/hr. 

 

 

Performance Diesel VGT-500

Performance Diesel VGT-500

Other fun features of the boat include the twin 7,000 lumen LED flood lights from PTLX, the electronically actuated windscreen, 5 ton flush mounted pick points, and Aquatrac PVC laminated foam decking. 

Boat Characteristics

Speed: .............................................  50MPH W/ 500HP 6.6L Duramax 

Hull Lengths Available: ................  28' 

Beam with Collar: .........................  10'-6" Inflated, 10' Road Width

Deadrise at Transom: ...................  22 Degrees

Deadrise at Entry: .........................  48 Degrees

All Aluminum Construction: .......  Alloy 5086 H116

Fuel Capacity: ................................  85 Gallons

 

See More at 

Living Up to The Name of Life Proof Boats

100% Foam Collar - It can handle whatever you come across. 

100% Foam Collar - It can handle whatever you come across. 

A lot of people see our boats and think that the collar around the boat is filled with air. It is not their fault, because most manufactures that put collars on their boats use air. Under low pressure, the air is put into bladders which are usually glued and sometimes mechanically fastened to the hull. Because of their inherent loss of flotation and stability if the collar were cut or ruptured they are required by the USCG to be segmented into multiple chambers so that if one fails, the boat won’t lose too much buoyancy. The concept works and has been a staple for many years in certain applications. 

But the USCG for the past 15 years has found a better technology, Foam Collars. They have found that they are more durable, remove the concern of puncturing or losing air, add more stability and are easier to repair or service. 

Life Proof Boats was founded under the principle of giving the recreational industry the safest platform we can. That is why we are a little obsessed with Foam. Just to be clear this is not the foam you find protecting your new TV when you pull it out of the box, or the two part mixed foams that other manufactures inject below their decks. Those foams hold water. Even the foams you have been told are closed cell and are injected under the decks of other builders will hold water over time. They are only closed cell at first formation when rigid. Over time as the boat stresses and shutters with stress as it is used, the foam cells crack and open allowing water to enter them. They also are not as resilient to fossil fuels or nitro methane products as the foams we use. We use closed cell polyethylene foam. 

FAST

Here at IMS, we are working on new collar technologies that will advance the industry. We have established a brand around this technology called FAST. It stands for Foam Air Stabilized Technologies. Our new foam, air, or foam/air hybrid collar systems are revolutionizing the industry. Mated with our patented collar attachment and installation systems, installation, removal, or repair of the collar will be smooth and easy. FAST has the ability to provide 100% foam, 100% air, or foam/air hybrid systems with any ratio of foam or air depending on your application. Our system also allows you to change the ratio of air to foam in the future by simply changing out the air bladder.
 

Check out the video.